Aye Chan Aung (Electronics)

Kyoritsu KEW SNAP200 Clamp Meter     Clamp meters are used to test how much current is flowing through in the desired wire.  Sometimes it needed to measure how much current is need and the flowing current is should be enough or not. In this article, Kyriotsu KEW SNAP200 is shown for its functions and usability.  Compact and lightweight clamp meter. 40A / 400A AC 400V / 600V AC 400V / 600V DC Resistance / beep function. Automatic shutdown. Data hold function. Maximum display 400 count. Designed to meet international safety standard IEC61010-1 CAT.III 300V Technical Specifications AC A 40A/400A ±2.0%rdg±6dgt(50/60Hz) AC V 400V/600V ±2.0%rdg±5dgt(50/60Hz) DC V 400V/600V ±1.5%rdg±5dgt Ω 400Ω/4kΩ ±2.0%rdg±5dgt Continuity buzzer Buzzer Sounds at 50Ω ± 35Ω     Conductor Size Max Ø33mm Withstand Voltage 3700V AC /  second   Applicable standards IEC61010-1CAT.III 300V Pollution degree 2 / CAT.II 600V IEC61010-2-031 IEC61010-2-032 I...

Fluke 17B+ Multimeter AC volts: (4.000 V, 40.00 V, 400.0 V, 1000 V)/(1.0 % + 3) DC volts: (4.000 V, 40.00 V, 400.0 V, 1000 V)/(0.5 % + 3) AC mV: 400.0 mV/3.0 % + 3 DC mV: 400.0 mV/1.0 % + 10 Diode test: 2.000 V/10% Resistance (Ohms): 400.0 Ω/ 0.5 % + 3; (4.000 kΩ, 40.00 kΩ, 400.0 kΩ, 4.000 MΩ)/0.5 % + 2; 40.00 MΩ/1.5% + 3 Capacitance: (40.00 nF, 400.0 nF)/2 % + 5; (4.000 μF, 40.00 μF, 400.0 μF, 1000 μF)/5 % + 5 Frequency: (50.00 Hz, 500.0 Hz, 5.000 kHz, 50.00 kHz, 100.0 kHz)/0.1 % + 3 AC current μA: (400.0 μA, 4000 μA)/1.5 % + 3 AC current mA: (40.00 mA, 400.0 mA)/1.5 % + 3 AC current A: (4.000 A, 10.00 A)/1.5 % + 3 DC current μA: (400.0 μA, 4000 μA)/1.5 % + 3 DC current mA: (40.00 mA, 400.0 mA)/1.5 % + 3 DC current A: (4.000 A, 10.00 A)/1.5 % + 3 Temperature: 50 °C- 400 °C/2 % ± 1 °C, 0 °C- 50 °C/± 2 °C,-55 °C- 0 °C/ 9 % ± 2 °C Overload Protection:  + AC volts: 1000 V  + AC mV: 400 mV + DC volts: 1000 V  + DC mV: 400 mV Battery type: 2 AA, NEDA 15A, IEC LR6 IP rating: IP...

 This post will bring you to basic of  PLC